|
 |
 |
|
| Thermoplastic Traffic Paint |
Adhesion: The unique formulation ensures good adhesion to the road surface .Before construction, brush some special priming paints (special for cement roadbed ) produced by our company which will make the cohesion stronger.
Antiskid: Content of antiskid agent, which makes the paint keeping excellent evenness and better antiskid, and maximum ensures the security of driving.
Reflection: There are sufficient pellicle-spraying high-quality glass micro-beads with stable reflection. Scientifically choose the mixed glass micro-beads with different proportions according to the settling rate of glass micro-beads in coatings, which ensures the old and new lineation always keeping good reflecting effects.
Drying fast: Provide different formulations to produce paint according to different temperature, humidity and the conditions of road in construction etc, which ensures the coating with excellent drying speed and good antifouling properties
|
Stability: Choose raw materials with excellent light and thermal stabilities. The paint which is used in the area under strong sunlight conditions add anti-ultraviolet agent, which ensures the line keeping original color and shine for a long time.
Anti-micro crack: The micro crack of line is a big technical problem in the road-marking industry home and abroad. After long-term research organized by our company, the approach that adding liquid materials with high-temperature resistance and functional structural raw materials has completely resolved the problem.
|
|
|
| |
| Proportions of constituents of mixture |
| Binder Content |
18.0-22.0% |
| Solid Glass bead content |
20%min |
| Aggregate pigment extender and solid glass bead content |
78.0-82% |
|
| Proportions of constituents of mixture |
| Binder Content |
18.0-22.0% |
| Solid Glass bead content |
20%min |
| Aggregate pigment extender and solid glass bead content |
78.0-82% |
|
|
| Water-base Traffic Paint |
Water based road marking paint is made of Fastrack latex, pigment and agent .This kind of marking has such features: No poison ,no contamination; good adhesion ;good reflection at night and rainy day, long service life ,good abrasion resistance ,skid proof ;easy construction operation.
Product features:
- Water as solvent ,few volatilization, good environment protection;
- Good adhesion to glass beads, good reflection;
- Dry fast ,surface drying time 5-10mininuts;
- Easy to clean equipment;
Technical parameters:
- Product condition : No agglomeration, easy to agitate;
- Viscosity:¡Ý80KU
- Density:¡Ý1.6g/ml
- Workability: Airless or pneumatic spray ,performance is good;
- Film appearance: No wrinkle, bur, bubble , slot, stick and so on;
- No stick to wheel:¡Ü10minutes
- Opacity (300mircon WFT):white ¡Ý95%,yellow¡Ý80%
- Brightness: white ¡Ý0.35,yellow¡Ý0.27
- Abrasion resistance :¡Ü40(JM-100 rubber emery wheel)
- Water resistance :No change after 24hours immersed into water
- Alkali-proof :No change after 24 hours immersed into alkali solution.
Operation guide
- Well stirred before use and should be kept under shade;
- No need to dilute the product with water or solvent ;
- Proper sealed piping should be used ,thoroughly rinsed the system with clean water after used;
- Water washed or soap the spray nozzle into water during application breaks;
- If heating is needed ,the temperature should not exceed 40¡æ;
- Application is not recommended whenever the road surface is wet, dirt or when the weather condition is not suitable, ie RH above 85¡æ,or temperature below 10¡æ,or likely to rain with the few hours;
- Use appropriate equipment .
|
|
|
| Solvent Traffic Paint |
-
Adopt the special acrylic resin as main materials, which makes the paints with outstanding adhesion and excellent weather resistance.
-
Scientific ingredient proportion makes the paint with higher solidity ratio and staying for long time without precipitation.
-
Thick line marking layer. Sprinkle reflecting materials Glass beads on the surface, which makes the reflecting effects last long.
-
Fast drying speed ,in normal condition no stick to wheel :7-10mins
Technical parameters:
Viscosity: 1.46
Intensity: 1.46 g/ml
Drying time of no sticking to wheel: 12mins
Opacity White ¡Ý95
Yellow ¡Ý80
Anti-abrasion (mg)(200r/1000g reduce weight): 29.6
Anti-watering No abnormal phenomenon dunking in water for 24h
Anti-alkali No abnormal phenomenon dunking in calcium hydroxide saturated solution for 24h?
Contents of solid: 68%
|
|
|
